Pattern printed for the blouse and shirt dress Lycène by Laeti and Léa from size 34 to 50

Lycène is an oversized shirt with a straight cut and low armholes that give it a relaxed look. The gathered or inverted pleat details at the back neckline and sleeves add a feminine touch. The button closure under a placket at the front centre adds a hint of elegance to this shirt with neat finishes.

To give your shirt a style that suits you, you can choose from the following finishes:

• Shirt or dress length.
• A collar stand with classic (French) collar or club collar.
• 6 sleeve lengths and finishes.
• A wavy hemline offered in 2 lengths for the back.
• Finishes with inverted pleats or gathers for the back and sleeves.
• Patch pockets on the chest.

and attaching a shirt cuff

Sewing level

Intermediate to advanced depending on the options chosen (3/5 to 4/5).

The technical points are the understanding and precision needed to form the inverted pleats, assemble the collar on a stand, and create a sleeve cuff with a tear-proof slit, especially if you choose a fluid/slippery fabric.

I support you with explanations and detailed assembly diagrams, as well as an assembly help video.

Size guide

This pattern is designed for a height of 1.65 m.

The most important measurements for this model are height and bust circumference.

It is a loose model, so if you are between two sizes, choose the smaller size

If you are taller or shorter than the stated height, and the finished garment measurements do not suit you, you can make adjustments: you can shorten or lengthen the sleeve and/or the bodice as explained in the guide.

Contents

• Detailed assembly guide (with diagrams)
  
• Pattern sheet in 2 formats (Plotter format A0 and booklet A4). Files with layers: you can choose only the size(s) to print, with or without seam allowances. No cutting for the A4 format: the sheets join edge to edge. Pieces without overlap.

Required materials

Fabric

For a fabric width of 140 cm, choose a lightweight to medium weight woven fabric (80 to 170g/m2): a cotton not too thick (poplin, Liberty), viscose, tencel, linen, silk, double gauze, embroidered cotton, chambray, crepe…

Warning! Choosing a very fluid and/or slippery fabric (some viscose) or one that deforms easily (e.g. double gauze) can make sewing more delicate. If you are a beginner, I advise you to start with a cotton

Warning! The values are given as a guide and may vary depending on the options you have chosen and your ability to arrange the pieces when cutting the fabric.

You will also need more fabric if you have to respect pattern matching and direction (allow 30% more fabric in these cases)

Small haberdashery

• Matching thread and needles suitable for your fabric.
  
• Interfacing suitable for your fabric* for the collar and cuffs if your fabric is very light.
  
• Buttons with a maximum diameter of 12 mm: prefer flat and simple buttons for the hidden button placket. You can choose a pretty decorative button for the collar stand.
  
• Bias binding to match for the long sleeve version: 30 cm x 2.4 cm (ideally on the bias)
  

* Note : Type and thickness to choose according to your fabric. A fabric interfaced with woven interfacing will keep its “natural” feel and drape but with more body. A fabric interfaced with non-woven interfacing will have a stiffer appearance.

To help you

• The Lycène assembly help video.
• The video tutorial to make an English seam.
• The video tutorial to make a tear-proof slit.